Setting Up The Printer After Transportation; Uninstalling And Reinstalling The Printer Driver; Macintosh - Epson Stylus Pro 4000 Printer Manual

Caution: Do not turn off
the printer by unplugging
it or turning off a power
strip. You will not be able
to lock the print head, and
ink will leak out of the
reservoir, damaging the
printer.
Caution: Make sure you
release the print head by
pulling out the green tab.
Maintaining and Transporting the Printer
5. Turn off the printer and unplug the power cord.
6. If you need to ship the printer, you must repack it using the original box
and packing materials and secure it to a pallet. If you do not have these
items, contact EPSON to request them. Otherwise, the printer may be
damaged beyond repair.
If you are transporting the printer in your own vehicle without the
original packaging, make sure you wrap and pack the printer securely.
Transport the printer in a horizontal position on a flat, stable surface.
7. Keep the printer level while moving it.

Setting Up the Printer After Transportation

Setting up the printer after transporting it is almost identical to setting it up
for the first time, as described on the Start Here sheet.
Keep in mind that the first time you start printing after moving the printer,
the print head nozzles may be clogged—especially if the printer hasn't been
turned on for a long time. You may need to run a cleaning cycle (page 96)
and realign the print head (page 99) to ensure good print quality.
If you see the message
after setting up the printer, select
described on page 98.

Uninstalling and Reinstalling the Printer Driver

If you need to uninstall and then reinstall the printer driver software for any
reason, follow the instructions in the appropriate section below.

Macintosh

1. Insert your printer software CD-ROM. Then double-click the
CD-ROM icon to open it, if necessary.
2. Double-click the
3. Double-click
Install Printer Driver and Utilities.
4. Enter your password if necessary.
4-113
PERFORM POWER CLEANING?
to start the power cleaning process, as
Y
program to open it.
Installer
| 113
on the LCD panel