Selecting Paper Configurations - Epson Stylus Pro 4000 Printer Manual

42 | Handling Paper and Other Media
• CUT METHOD
thinner media, or adjust the speed for thick media. You may need to
experiment to determine the cleanest cut for your paper.
• PPR FEED ADJUSTMENT
lower value if you see white lines on your prints, or a higher value if
you see dark lines.
• EJECT ROLLER TYPE
with non-EPSON media. You may need to experiment to
determine the best setting for your paper.
• DRYING TIME
smearing the ink. You can make the print head wait up to 10
seconds after each pass to allow ink to dry on the page.
lets you decrease the paper suction level when printing
• SUCTION
on thin media (under 12 lb), such as drafting paper or backlight film.
adjusts the intensity of the MicroWeave
• M/W ADJ
improves print quality, but lowers printing speed.
10. When done, press the

Selecting Paper Configurations

Once you have created a paper configuration, you can select it whenever you
print on that paper:
1. Press the
Menu
CUSTOM PAPER
2. Press the button to display
button.
Menu
3. Press the button to select the configuration number that you want to
use. If you select
STANDARD
select a number from 1 to 10, the control panel settings override the
driver settings.
4. Press the
Menu
displayed on the LCD.
5. Press the Pause button to exit the menu.
1-42
lets you decrease the cutting blade pressure for
helps eliminate banding. Choose a
lets you define the eject roller for printing
lets you print with non-EPSON media and avoid
Pause button.
button, then press the
. Press the button again.
Menu
PAPER NUMBER
, the printer uses the driver settings. If you
button. The configuration number you selected is
® pattern. This
button to display
, then press the