Epson Stylus Pro 4000 Printer Manual page 66

66 | Printing with EPSON Drivers for Macintosh
Tip: If you turn off color
management, you can
use the Color Density
setting to control the
ink density. Click the
Paper Config button.
5. Choose any of the following:
• MicroWeave or Super MicroWeave
banding effects. If you notice banding with the standard
MicroWeave
• High Speed
• Flip Horizontal
backlight film.
• Finest Detail
line art.
• Edge Smoothing
6. Choose one of the following Color Management settings:
• Color Controls
brightness, contrast, saturation, and CMY inks, or choose from the
three Color Adjustment modes. You can also choose from three
Gamma settings.
• PhotoEnhance4
common to digital camera images or choose special tone and effect
settings.
lets you select from three Rendering Intent settings for
• ColorSync
mapping colors to your printer's
cases, you will get better results by applying color management in
your application, rather than in the printer driver.
• No Color Adjustment
Disables color management in the printer driver. Choose this mode
when you use a color managed workflow in Photoshop or other
software applications.
2-66
setting, select
Super MicroWeave
for fast, bidirectional printing at lower quality.
for printing a mirror image of your file. Use with
for sharper edges when printing text, graphics, and
to improve the quality of low-resolution images.
lets you specify individual values for adjusting
allows you to correct noise and other problems
EPSON Standard
to eliminate unwanted
(if available).
profile. In most