Setting Up The Printer After Transportation; Uninstalling And Reinstalling The Printer Driver; Macintosh - Epson pro4880gd Printer Manual

Caution: Make sure you
release the print head by
pulling out the green tab.
Note: You may have to
scroll down to see the
English and OS X
folders.
Maintaining and Transporting the Printer
7. If you need to ship the printer, you must repack it using the original box
and packing materials and secure it to a pallet. If you do not have these
items, contact Epson to purchase them. Otherwise, the printer may be
damaged beyond repair.
If you are transporting the printer in your own vehicle without the
original packaging, make sure you wrap and pack the printer securely.
Transport the printer in a horizontal position on a flat, stable surface.
8. Keep the printer level while moving it.

Setting Up the Printer After Transportation

Setting up the printer after transporting it is almost identical to setting it up
for the first time, as described on your Start Here sheet.
Keep in mind that the first time you start printing after moving the printer,
the print head nozzles may be clogged—especially if the printer hasn't been
turned on for a long time. You may need to run a cleaning cycle (page 100)
and realign the print head (page 102) to ensure good print quality.
After setting up the printer, if you see a message on the LCD asking you
whether you would like to run an auto nozzle check, select
nozzle check procedure.

Uninstalling and Reinstalling the Printer Driver

If you need to uninstall and then reinstall the printer driver software for any
reason, follow the instructions in the appropriate section below.

Macintosh

1. Quit all running applications.
2. Insert the Epson printer software CD-ROM into your Macintosh.
3. Open the
Epson
4. Double-click the
121
CD-ROM desktop icon, if necessary.
folder, then double-click the
English
| 121
to start the
Y
folder.
OS X