Epson Stylus Pro 4000 Printer Manual page 61

Note: These settings
override settings made
through the control panel.
Printing with EPSON Drivers for Macintosh
5. Choose one of the following
• Normal Cut
image.
• Double Cut
print individually. This provides the cleanest edge for borderless
printing.
causes the images to be printed end-to-end and saves
• Single Cut
paper. With borderless printing, you may see a sliver of the previous
or next image.
disables automatic cutting. Choose this setting if you want to
• Off
operate the cutter manually, print multiple print jobs without
cutting, or if you are printing on heavy media that must be cut with
scissors. See page 38 for instructions on using the button to operate
the cutter.
6. Make the settings you want for
7. Select any of the following options:
• Auto Rotate
the printable width of the paper roll. Your image is rotated
automatically by 90 degrees and printed crosswise.
• Print Page Line
your pages.
• Save Roll Paper
the last page of your document. Available only when you've selected
Roll Paper (Banner)
8. After making your settings, click
9. Print your image.
2-61
Auto Cut
allows margin space at the top and bottom of each
extends the space between the images and trims each
Orientation
saves paper if your document length is shorter than
prints trim lines on the right and bottom edges of
saves paper by not feeding the blank portion of
as the Paper Source.
.
OK
settings:
and
Reduce or Enlarge
| 61
.