Epson Stylus Pro 4000 Printer Manual page 51

Note: You may need to
change the Color Density
setting if your color profile
was created to optimize
D-max and color gamut.
Printing with EPSON Drivers for Macintosh
• No Color Adjustment
driver. Choose this mode when you use a color-managed workflow
in Photoshop or other software applications.
3. If you are using non-EPSON media and you need to fine-tune its
performance, select Paper Configuration from the pull-down menu.
You see this screen:
Select the Paper
Configuration page
4. Select the correct settings to match your ICC profile. These settings
override any paper configuration settings you may have made using the
printer's control panel.
• Color Density
when you turn off color management in your printer software).
• Drying Time per Print Head Pass
non-EPSON media and avoid smearing the ink. You can make the
print head wait up to 5 seconds after each pass to allow ink to dry on
the page.
• Paper Feed Adjustment
value if you see white lines on your prints, or a higher value if you
see dark lines.
2-51
to disable color management in the printer
lets you control the ink saturation level (for example,
lets you print with
helps reduce banding. Choose a lower
| 51