Balanced Climate Tm Mode - Bard Q-TEC Q A4D Series Installation Instructions Manual

Balanced Climate Mode
TM
Balanced Climate™ is a great comfort feature that can
easily be applied under any normal circumstances.
If the Bard air conditioning system is being set up
in a typical environment where 72°F is the lowest
cooling setpoint, remove the Y1/Y2 jumpers from
the upper and lower low voltage strips and install a
2-stage cooling thermostat. This will increase the
humidity removal up to 35% and provide a much more
comfortable environment. This mode will also increase
the supply temperature when in heating mode. When
Balanced Climate mode is activated, it is employed in
both heating and cooling modes.
Balanced Climate can readily be applied to duct-free
(supply and return air grille) applications. It may also
be applied to ducted applications with limited static
of 0.20" ESP (total including both supply and return
statics). Consult Bard Application Engineering for
details prior to implementation.
CAUTION: Balanced Climate is not a replacement for
a dehumidification (hot gas reheat) unit for extreme
applications, but rather an enhancement feature for
limited climates and applications.
Manual 2100-752C
Page 30 of 41