Table of Contents
Advertisement
Install the air baffle
Use this information to install the air baffle.
"Read the
installation
Guidelines" on
page 45
Before installing the air baffle:
1. Ensure that the retaining clips on each end of the DIMM connectors are closed.
2. If you want to install a RAID super capacitor module, install it onto the air baffle first. See "Install a RAID
super capacitor module" on page 65.
To install the air baffle, complete the following steps:
Watch the procedure. A video of the installation process is available:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-AQrHuDWK6L3KtHWc6maY_O
• Youku:
http://list.youku.com/albumlist/show/id_50437162
Figure 35. Air baffle installation
Step 1.
Align the tabs on both sides of the air baffle with the corresponding slots on both sides of the
chassis.
Step 2.
Lower the air baffle into the server and press the air baffle down until it is securely seated.
After installing the air baffle:
1. If you have installed a RAID super capacitor module, connect it to the RAID adapter using the extension
cable that comes with the RAID super capacitor module. See "Internal cable routing" on page 32.
2. Complete the parts replacement. See "Complete the parts replacement" on page 144.
ThinkSystem SR530 Maintenance Manual
62
"Power off
the server
for this task"
on page 14
Advertisement
Table of Contents
