Table of Contents
Advertisement
Server model with four 3.5-inch simple-swap drives
Use this section to understand the internal cable routing for the server model with four 3.5-inch simple-swap
drives.
Figure 19. Cable routing for the server model with four 3.5-inch simple-swap drives
The simple-swap drive backplate assembly comes with a power cable and a SATA signal cable.
From
Power cable of the backplate assembly
1
SATA signal cable of the backplate assembly
2
To
Backplane power connector on the system board
SATA 0-3 connector on the system board
Chapter 2
.
Server components
39
Advertisement
Table of Contents
