Table of Contents
Advertisement
Install the rack latches
Use this information to install the rack latches.
"Read the
installation
Guidelines" on
page 45
To install the rack latches, complete the following steps:
Watch the procedure. A video of the installation process is available:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-AQrHuDWK6L3KtHWc6maY_O
• Youku:
http://list.youku.com/albumlist/show/id_50437162
Step 1.
On each side of the server, align the rack latch with the pin on the chassis; then, press the rack
latch onto the chassis and slightly slide it forward as shown.
Figure 24. Rack latch installation
.
Chapter 3
Hardware replacement procedures
51
Advertisement
Table of Contents
