E2677A/9A Solder-In Probe Heads - Agilent Technologies 1168/9A User Manual

E2677A/9A Solder-In Probe Heads

Table 21 Recommended Equipment
Equipment
Vise or clamp for holding tip
°
Metcal STTC-022 (600 C) or STTC-122(700
FR4 tip PC board.
0.381 mm (0.015 in) diameter RMA flux standard tin/lead solder wire
Fine stainless steel tweezers
Rosin flux pencil, RMA type (Kester #186 or equivalent)
Diagonal cutters
Magnifier or low power microscope
Agilent supplied trim gauge (01131-94311)
1168/9A Probes User's Guide
Use the following procedure to install or replace the wire
leads when the mini- axial resistors become damaged or
break off due to use.
Table 20 Resistors and Bandwidth
Resistor
91W
150W
0W
°
C) tip soldering iron or equivalent. The 600
Maintaining Probe Heads
E2677A/9A Solder-In Probe Heads
For Bandwidth
Full
Medium
Full and Medium
°
C tip will help limit burning of the
3
115