Specifications; Hdcu1700 - Sony HDCU1700 Operation Manual

Specifications

HDCU1700

General
Power supply 100 V to 240 V AC, 50/60 Hz
Current consumption 4.1 A (max.)
Standby power Approx. 5 W
Operating temperature –10°C to +40°C (14°F to 104°F)
Storage temperature –20°C to +60°C (–4°F to +140°F)
Mass Approx. 6.7 kg (14 lb 12 oz)
Dimensions (Unit: mm (inches))
1
HD CAMERA CONTROL UNIT
7
200 (7 / )
8
7
5 ( / )
32
3
9 ( / )
8
Input/Output connectors
CAMERA Optical fiber connector (1)
180 V DC power supply
INTERCOM/TALLY/ D-sub 25-pin connector (1)
PGM
• INTERCOM (PROD/ENG), 4W/RTS/CC,
0 dBu
• PGM, 2 systems, 0 dBu/–20 dBu
• TALLY (R, G, Y)
• FLAG
RCP/CNU 8-pin multi-connector (1)
TRUNK A 12-pin (1)
LAN 8-pin (1)
Input connectors
AC IN (1), 100 V to 240 V AC
RET 1, 2, 3 BNC-type (3)
3G-SDI: SMPTE ST424/ST425,
2.970 Gbps/2.967 Gbps
HD-SDI: SMPTE ST292, 1.485 Gbps/
1.4835 Gbps
SD-SDI: SMPTE 259M, 270 Mbps
VBS: 1.0 Vp-p, 75 ohms
REFERENCE BNC-type (2), loop-through output
HD: SMPTE 274M, tri-level sync, 0.6 Vp-p,
75 ohms
SD: Black burst (NTSC: 0.286 Vp-p,
75 ohms/PAL: 0.3 Vp-p, 75 ohms) or NTSC
10F-BB
PROMPTER BNC-type (2), loop-through output, analog
signal, 1.0 Vp-p, 75 ohms
MIC REMOTE D-sub 15-pin (1) (JAE-made DA-C1-J10
recommended)
(switchable to WF REMOTE by an internal
setting)
Output connectors
AUDIO OUT CH1, XLR 3-pin, male (2), 0 dBu/–20 dBu/+4 dBu
CH2
HD/SD SDI OUTPUT BNC-type (2)
HD-SDI: SMPTE ST292, 0.8 Vp-p,
75 ohms, 1.485 Gbps/1.4835 Gbps
SD-SDI: SMPTE 259M, 0.8 Vp-p, 75 ohms,
270 Mbps
HD-SDI/SD-SDI selectable
HD/SD SDI OUTPUT BNC-type (2)
(MONI)
HD-SDI: SMPTE ST292, 0.8 Vp-p,
75 ohms, 1.485 Gbps/1.4835 Gbps
SD-SDI: SMPTE 259M, 0.8 Vp-p, 75 ohms,
270 Mbps
HD-SDI/SD-SDI and character ON/OFF
selectable
CHARACTER/SYNC BNC-type (1)
HD SYNC: HD, BTA-S001, tri-level sync,
0.6 Vp-p, 75 ohms
SD SYNC: SD, composite sync, 0.3 Vp-p,
75 ohms
CHARACTER: VBS, 1 Vp-p, 75 ohms,
character ON/OFF selectable
CHARACTER/HD SYNC/SD SYNC
selectable
40