Sony HDCU1700 Operation Manual page 32

CCU
CONFIGURATION
Page name Item
Page No.
4K 2SI diamond marks
This function is for displaying a test pattern like the following in
the area at the bottom right of the 4K color bar when 4K 2
sample interleave output. OK is displayed if the connections
for Links 1 to 4 are correct, and OK is not displayed if they are
incorrect. This function can be used to check the connections.
<BAR CHARACTER> BAR CHARACTER
C02
ALL CLEAR
<MONITOR 1> CHARACTER
C03
PIX CHARACTER
Settings
Correct connections
When Link 1 and Link
2 have been swapped
WHITE-LEVEL 0.0 to 107.0%, 71.5
BLACK-LEVEL 0.0 to 107.0%
WHITE-LEVEL 0.0 to 107.0%, 75.0
BLACK-LEVEL 0.0 to 107.0%
Description
Sets strings 1 to 12 that are superimposed on the
color bar signal.
Execute to clear all character strings. (Execute via
ENTER.)
Sets the MONITOR output bar character.
Sets the MONITOR output bar character level.
Sets the MONITOR output bar character border
black level.
Sets the PIX output bar character. (Displayed only
when HKCU1001/1003 is installed.)
Sets the PIX output bar character level.
Sets the PIX output bar character border black level.
32