Sony HDCU1700 Operation Manual page 29

SYSTEM OPERATION
Page name Item
Page No.
<SD ASPECT> SD ASPECT
S05
SD LB SEL
H-POSITION
V-POSITION
H-INTERP
V-INTERP
<RETURN FORMAT> RET1
S06
RET2
RET3
RET4
AUTO SCAN
LINK TO MAIN
OUTPUT FORMAT
1080/59.94I
1080/29.97PsF
1080/23.98PsF
720/59.94P
1080/50I
1080/25PsF
1080/24PsF
720/50P
Settings
SQUEEZE, EDGE CROP, LETTER
BOX
16:9, 15:9, 14:9, 13:9
–99 to 99, (–99) to (99), 0
CENTER ON, OFF, (ON), (OFF)
–99 to 99, (–99) to (99), 0
CENTER ON, OFF, (ON), (OFF)
A, B, C, D, E
A, B, C, D, E
When 1.001 is selected for
FREQUENCY HD: 1080/59.94I
(PsF), 1080/23.97PsF, 720/59.94P,
525/59.94I (PsF), NTSC
When 1.000 is selected for
FREQUENCY HD: 1080/50I (PsF),
1080/24PsF, 720/50P, 625/50I
(PsF), PAL
When 525/59.94I (PsF), NTSC,
625/50I (PsF) or PAL are selected,
the following settings are available:
SQUEEZE, EDGE CROP, LETTER
BOX,
16:9, 15:9, 14:9, 13:9
Execute via EXEC.
MANUAL/AUTO
RETURN FORMAT
1080/59.94I (PsF), 525/59.94I (PsF), NTSC
1080/23.98PsF, 1080/59.94I (PsF), 525/59.94I (PsF), NTSC
720/59.94P, 525/59.94I (PsF), NTSC
1080/50I (PsF), 625/50I (PsF), PAL
1080/24PsF, 1080/50I (PsF), 625/50I (PsF), PAL
720/50P, 625/50I (PsF), PAL
Description
Selects the SD output aspect.
Selects the LETTER BOX aspect ratio.
Sets the horizontal position.
Settings in ( ): Displayed when SQUEEZE or
LETTER BOX is selected in SD ASPECT. (Display
only)
Sets the horizontal centering position.
Settings in ( ): Displayed when SQUEEZE or
LETTER BOX is selected in SD ASPECT. (Display
only)
Sets the vertical position.
Settings in ( ): Displayed when SQUEEZE or EDGE
CROP is selected in SD ASPECT. (Display only)
Sets the vertical centering position.
Settings in ( ): Displayed when SQUEEZE or EDGE
CROP is selected in SD ASPECT. (Display only)
Selects the down converter horizontal filter.
Selects the down converter vertical filter.
Sets the return signal input format.
Sets input format, aspect ratio, and letterbox mode.
The following shows selectable RETURN FORMAT
settings at various OUTPUT FORMAT settings.
Note
RET4 is locked to NTSC or PAL.
Automatically detects the return signal input format,
and then executes.
Note
If the automatically detected result is invalid, the
previous setting flashes for 5 seconds, and then the
previous setting is maintained.
Sets the mode for linking the return signal to this
signal.
29