Macintosh System Requirements - Epson Stylus C84WN Setup And Installation Manual

Macintosh System Requirements

For wireless printing with the EPSON Stylus C84WN, make sure each
®
Macintosh meets the following requirements:
®
An Apple iBook,
Power Mac G3 or G4
®
Mac OS 8.6 through 9.x; OS X 10.1 through 10.3 (Mac OS 9.1 or later
recommended)
For Mac OS 8.6 through 9.x: 32MB of available RAM (64MB
recommended); for Mac OS X: 128MB RAM (256MB recommended)
100MB of free hard disk space (200MB recommended)
VGA display or better
CD-ROM or DVD drive for installing the printer software
Note:
If you are using AirPort, EPSON recommends that you use the print server with an
access point or AirPort base station. With AirPort, your print server works more
reliably in infrastructure mode.
Make sure the access point supports AppleTalk.
points, see EPSON's web site at: http://support.epson.com.
For computers not connected to a wired network, you need an AirPort
card or Macintosh-compatible wireless adapter. Make sure your card or
adapter works in ad hoc mode if you want to print without an access point.
Note:
For a list of supported cards, visit EPSON's support site at:
http://support.epson.com. Click Troubleshooting & FAQs in the column on the
left, then click Printers > Epson Stylus C84WN > Frequently Asked Questions >
Wireless Networking Questions.
If you are using an AirPort card or the AirPort base station, use AirPort
software version 2.04 or later.
8
Introduction
® ®
iMac, PowerBook
®
G3 or G4, Power Mac
®
For a list of supported access
®
G4 Cube, or