Transporting The Printer - Epson ActionPrinter 2250 User Manual

Maintenance and Transportation
To remove the old ribbon cartridge, first move the print head to the
center of the printer. Then remove the cartridge by lifting the posts
on either side of it.
To replace the ribbon cartridge, follow the steps in "Installing the
Ribbon Cartridge" in Chapter 1.

Transporting the printer

If you need to transport your printer some distance, carefully repack
it using the original box and packing materials, as described below:
1. Turn off the printer. Unplug the power cord from the electrical
outlet; then disconnect the interface cable from the printer.
2.
Remove the output guide and the ribbon cartridge.
3.
Remove the push tractor, if installed.
4.
Attach the protective materials to the printer. See page 1-3.
5.
Repack the printer, ribbon cartridge, output guide, and power
cord in the original packing materials and place them in the
printer's original box.
3-18 Using the Printer