Epson ActionPrinter 2250 User Manual page 74

Technical Specifications
Single sheets (Manual insertion):
Width
Length
Thickness
Weight
Continuous
paper:
Width
Copies
Thickness
Weight
Note: YOU can use recycled paper under normal conditions. If you notice
increases in ribbon consumption and paper jamming, use a higher grade of
paper.
Labels:
Size
Thickness
Weight
Envelopes:
Size No. 6
No. 10
Thickness
Weight
A-4 Appendix
148 to 257 mm (5.8 to 10.1 inches)
mm (3.6 to 14.3 inches)
92
to 364
0.065 to 0.14 mm (0.0026 to 0.0055 inches)
2
g/m (14 to 24 lb)
52
to 90
101 to 254 mm (4 to 10 inches)
Two sheets (one original plus one copy)
0.065 to 0.18 mm (0.0026 to 0.0071 inches) total
2
52 g/m (14 to 22 lb) for one sheet
to 82
2
40 to 58 g/m
(12
forms
Use only two-part carbonless multi-part forms and
l
use them only with the optional push tractor.
101 to 254 mm (4 to 10 inches) width for backing
sheet
63.5 x 23.8 mm (2 1/2x 15/16 inches) minimum for a
label
0.07 to 0.09 mm (0.0028 to 0.0035 inches) for backing
sheet
0.16 to 0.19 mm (0.0063 to 0.0075 inches) total
2
68 g/m (17 lb)
Use continuous type labels only with the optional
l
push tractor.
Use labels only under normal temperature and
l
humidity conditions.
166 x 92 mm (6.5 x 3.6 inches)
240 x 104 mm (9.4 x 4.1 inches)
to 0.48 mm (0.0063 to 0.019 inches)
0.16
2
g/m (12 to 20 lb)
45
to 75
Use envelopes only under normal temperature
l
and humidity conditions.
Load envelopes with the longer side inserted into
l
the rear slot by manual insertion only.
to 15 lb) per sheet in multi-part