Choosing A Place For The Printer - Epson ActionPrinter 2250 User Manual

Choosing a Place for the Printer

The printer works flat or upright, as shown below. You can set it
whichever way fits your preference or working space. (When you
install the push tractor, you must use the flat position.)
When selecting a place for your printer, follow these guidelines:
Place the printer on
on rough surfaces because you may damage the flap on the
bottom.
Place the printer close enough to the computer for its interface
cable to reach the computer.
Leave adequate room for easy operation and maintenance.
Avoid locations that are subject to direct sunlight, excessive heat,
moisture, or dust.
Use a grounded outlet; do not use an adapter plug.
Place the printer where you can easily unplug the power cord.
Avoid electrical outlets controlled by wall switches or automatic
timers, and avoid outlets on the same circuit as large motors or
other appliances that can cause fluctuations in line voltage.
Keep the entire computer system away from potential sources of
electromagnetic interference, such as loudspeakers or the base
units of cordless telephones.
Setting Up the Printer
1-4
a
flat, stable surface. Do not slide the printer