Changing The Default Settings - Epson ActionPrinter 2250 User Manual

Changing the default settings

If you do need to change any default settings, you can do as
described below. You press the control panel buttons, and the
control panel lights show your selections.
Note: You
repeat steps 6 through 8 if you want to make more
can
than change. Also, you can turn off the printer and start over
one
if you are not sure about a setting.
1. Make sure the printer is turned off and paper is loaded in the
paper cassette. If you installed the push tractor, always use
continuous paper for the default-setting mode.
2. Slide the narrow cover off of the printer cover as shown. This
makes it easier to read the printed messages.
Using the Default-Setting Mode
Using the Printer
3-7