Multi-Part Forms; Labels - Epson ActionPrinter 2250 User Manual

Multi-part forms

You can use carbonless continuous multi-part forms of up to three
parts (one original plus two copies).
Load multi-part forms with the push tractor only. You load
l
multi-part continuous paper the same way as ordinary
continuous paper. For details, see "Loading continuous paper"
on page 2-7.
Use only multi-part forms joined with spot-gluing that is free of
l
wrinkles and waves. Never print on multi-part forms joined
with metal staples, tape, or continuous gluing.
If you need to adjust the top-of-form position, use your software
l
or change the default top-of-form position as described in
Chapter 3. You may have to experiment to get the setting you
want.

Labels

This printer can print on labels, but you must use the push tractor.
0
CAUTION:
they are not fed backward because backward feeding can
l
make them peel off their backing and jam the printer.
To make sure that the labels do not peel off and jam the printer,
change the back-feed setting in the default-setting mode to Disable.
(For instructions, see "Changing the default settings" in Chapter 3.)
When the back-feed setting is Disable, the printer never feeds paper
backward.
The back-feed setting of Disable produces the following results:
The printer does not feed paper to the paper-park position even
l
if you press the
The tear-off feature is disabled.
l
When you use labels, always be sure that
LF/FF FONT
and
Printing
buttons.
Paper Handling
on Special Paper
2-17