Epson ActionPrinter 2250 User Manual page 70

Troubleshooting
The paper does not eject properly.
l
The page may be too long. Tear off the fresh supply of paper
and eject the page from the printer. Use only paper that is
within the specified length range described in the Appendix.
When you switch between single sheets and continuous paper, the
l
beeper sounds several times and the
You may have tried to change the paper-release lever
position while paper remained in the printer. Return the
paper-release lever to the previous position and eject paper
(or feed paper to the paper-park position). Then change the
paper-release lever position.
The does not feed backward to the paper-park position
paper
l
off feature does not work.
You may have set the back-feed setting in the default-setting
mode to Disable. Set the back-feed setting to Enable. See
"Changing the default settings" on page 3-7. However, when
you print on labels, make sure you set the back-feed setting
to Disable.
3-26
Using the Printer
READY
light goes off
or
the tear-