Buttons - Epson ActionPrinter 2250 User Manual

FONT
lights
FONT
The lights indicate the current font setting. These lights change
when you press the
control panel to see which font is selected. For instructions on
selecting fonts with the
FONT
The lights (Light 1 and Light 2) also indicate your selection in
the default-setting mode. For more information about the default-
setting mode, see page 3-5.

Buttons

The two buttons on the control panel perform different functions
depending on the printer mode.
FONT
button
FONT
Press the button during normal operation to cycle through the
font choices on the font menu. The two
selections. For more about choosing a font with this button, see page
3-5.
FONT
Hold down the
the default-setting mode. When you are in the default-setting mode,
use this button to make your selection. For more information about
the default-setting mode, see page 3-5.
LF/FF
button
LF/FF
Press the
line. Hold down the
advance continuous paper to the next top-of-form. You can also
LF/FF
press the button to eject a page.
When you are in the default-setting mode, use this button to change
the default settings. For more information about the default-setting
mode, see page 3-5.
FONT
button. Look at the font menu on the
FONT
button, see page 3-5.
button while you turn on the printer to enter
button during normal operation to feed paper line by
LF/FF
button to load a single sheet of paper or to
Operating the Control Panel
FONT
lights indicate current
Using the Printer 3-3