Table of Contents
Advertisement
Control Panel
Buttons and Lights
Note:
The control panel is designed to easily convey functions and operations.
Single button operations:
Button combinations:
Functions mode:
1
Font lights (Blue)
2
Tear Off light (Blue)
3
[Font]
(Functions mode)
4
Tear Off button (o)
(Single button)
5
[Menu]
(Button combinations)
The Tear Off (o), LF/FF (d), Load/Eject (u), and Pause (
perform common paper operations.
Activate [Menu] and [Reset] by using a combination of button operations.
Activate [Font] and [Micro Adjust] by holding down the
seconds.
One of the lights turns on when the power is on. The lighting pattern indicates
the font that is selected on the printer.
Flashes when continuous paper is in the tear off position.
Hold down the
button for three seconds to enter [Font] select mode, and
then press the o button to change the font settings.
For details, see "Selecting a Font and Menu" on page 20.
Advances continuous paper to the tear off position.
Feeds continuous paper backward from the tear off position to the top-of-form
position.
Press both button o and d at the same time, the printer enters or exits the
Default Setting mode and you can set the various printer settings. For details,
see "About Your Printer's Default Settings" on page 21.
LQ-690II/LQ-690IIN
User's Guide
) buttons are designed to
button for three
Printer Basics
17
Advertisement
Table of Contents
