Omega CN9000A Series User Manual page 33

FUNCTION
.6 (Cont'd) DERIVATIVE TIME/RATE (OUTPUT 1)
(Op#).(Fn#)
6.6
7.6
8.6
9.6
10.6
11.6
12.6
13.6
14.6
*15.6
*Note: You will not see 15.6 on the display. The actual AT value, in
seconds, will appear at the left side of the display.
.7 DERIVATIVE APPROACH CONTROL (DAC) (OUTPUT 1)
Used to eliminate derivative action during system warm-up time.
Refer to Section 5.7.
(Op#).(Fn#)
0.7
1.7
2.7
3.7
4.7
5.7
6.7
*7.7
*Note: You will not see 7.7 on the display. The actual AT value in
multiples of the proportional band will appear at the left side of the
display.
TABLE 3-4 (Cont'd)
Parameter/Comment
200 s
1 sec
2 sec
3 sec
7 sec
15 sec
20 sec
35 sec
75 sec
AT value
Parameter/Comment
1.5 x proportional band
0.5 x proportional band
1.0 x proportional band
2.0 x proportional band
2.5 x proportional band
3.0 x proportional band
4.0 x proportional band
AT value
27