Xerox WorkCentre 3025BI Service Manual page 83

6. Lift the Transfer Roll out of the printer
Figure 2 Transfer Roll Removal (Top View)
Xerox® WorkCentre® 3025 Multifunction Printer Service Manual
(Figure 2).
Transfer Roll
Replacement
NOTE: Tapered Plastic Screws and Round Machine Screws are used to hold the PWB to the
frame. Make sure that the Plastic Screws go into plastic components and Machine Screws go
into the metal frame.
1. Align the slots in the Transfer Roll Bushing with the Guides on the Printer Frame
3).
Tilt the top of the Bushing inward to align the Latches while pushing it into place.
Figure 3 Transfer Roll Bushing Alignment (Top View)
Install the components in the reverse of removal.
June 2014
4-31
Guide
Slot
(Figure
Repairs
REP 1.17