GP 6 Machine Settings
Purpose
Use this procedure to configure machine settings from the Control Panel, Easy Print Manager,
and CWIS.
Procedure
From the Conrol Panel
1.
Press the <Information> button.
2.
Use the up/down arrows to scroll to the following menu items:
•
Feature Default
•
Fax Setup
•
System Setup
•
Network
To change settings Using Easy Print Manager (EPM):
1.
Connect to the WorkCentre® 3025 Printer with a USB cable.
2.
Open Easy Print Manager from the PWS.
3.
Select [Advanced Mode] then select [Machine Settings].
4.
Select from the following menu items to change the machine settings.
•
System
•
Earth Smart
•
Input Tray
•
Layout
•
Printer
•
Emulation
•
Copy
•
Fax
•
Scan
•
Network Setttings
From CWIS:
1.
Connect to the WorkCentre® 3025 Printer with a USB cable or wirelessly.
2.
Open Easy Print Manager and select the [CWIS] icon.
3.
Login in to CWIS. Username: (Admin) Password: (1111)
NOTE: It may be necessary to obtain the username and password from the customer if
they have been changed.
General Procedures and Information
GP 6
4.
Select [Properties] then select from the following menu items to change the machine set-
tings:
•
Firmware
•
System
•
Printer
•
Copy
•
Fax
•
Scan
•
E-mail Notification
•
Network Settings
•
Security
June 2014
6-16
Xerox® WorkCentre® 3025 Multifunction Printer Service Manual