GP 1 Diagnostics Entry and Exit
Purpose
This procedure describes the following items:
•
How to enter Diagnostics
•
The Diagnostic screen
•
How to exit Diagnostics
Procedure
Enter Diagnostics from the 3025NI model:
1.
Make sure the machine is in Ready mode.
2.
Enter the Diagnostic (Tech) Mode from the Control Panel. Press the following buttons in
quick succession: <Menu>#>1934>OK>.
3.
In the Diagnostic Mode, use the navigation buttons to scroll to the desired sub-menu.
4.
Press the <OK> button to confirm menu selections.
To enter Diagnostics from the 3025BI model:
1.
Make sure the machine is in Ready mode.
2.
Enter the Diagnostic (Tech) Mode from the Control Panel. Press the following buttons in
quick succession: <Menu>Back>Up arrow>Down arrow>OK>Stop.
•
Press the [Menu] button to access Diagnostics.
3.
In the Diagnostic Mode, use the navigation buttons to scroll to the desired sub-menu.
4.
Press the <OK> button to confirm selections.
To exit Diagnostics:
1.
From the Diagnostics menu, use up and down arrows to scroll to <Exit Diagnostics>.
2.
Press the <OK> button.
Refer to Section 6, Diagnostics for a listing of available functions within Diagnostic Mode.
Xerox® WorkCentre® 3025 Multifunction Printer Service Manual
GP 2 Machine Reports
Purpose
This procedure is used to access and print machine reports. The information within the reports
may be useful for troubleshooting problems.
Procedure
To access machine status and reports, follow the steps below:
From the Control Panel:
1.
Press the <Info> Button, then select: [Information Pages>Reports] to print the following
reports.
3025BI:
•
Configuration
•
Demo Page
•
Network Configuration
•
Supplies Information
•
Usage Counter
3025NI:
•
Configuration
•
Demo Page
•
Network Configuration
•
Supplies Info
•
Usage Counter
•
Fax Received
•
Fax Sent
•
(Fax) Scheduled Jobs
•
Fax Confirm
•
Junk Fax
•
Address Book
From a networked PC:
1.
Open Easy Printer Manager.
2.
Select the [Settings] tab then select the [CentreWare Internet Services] button.
3.
Login to CWIS: username (admin) password (1111)
NOTE: It may be necessary to obtain the username and password from the customer if
they have been changed.
June 2014
6-13
General Procedures and Information
GP 1, GP 2