Xerox WorkCentre 3025BI Service Manual page 134

NOTE:
* Indicates features included in the 3025NI model only.
Table 1 Diagnostic Mode Menu - Data Setup
Level 1 Level 2
Data Setup *Send Level
*DTMF Level
*Pause Time
*Dial Mode
*Modem Speed
*Error Rate
Clear All Memory
Toner Low Level
Clear Counts
Engine Footer
*Dial Tone
*Caller ID
*Busy Tone
Wrap Jam Clear
F/W Upgrade
**Set Serial No.
General Procedures and Information
Entering Diagnostic Mode
Level 3 Level 4
9-15 12
(High) 0-15 (Low) 0-15
1-9
Tone/Pulse
33.6
28.8
14.4
12.0
9.6
4.8
10%
5%
Set options Clearing Memory
1-30%
Enter <1934> ADF Scan
Platen Scan
Fuser
Transfer Roller
Pickup Roller
ADF Roller
ADF Rubber Pad
Off/On
Off/On
Off/On
Off/On
No/Yes
Off/On
Enter machine serial
number (Numeric
characters only)
NOTE:
** Indicates that there is a function in Diagnostics that allows for entry of the serial number
using the keypad (3025NI). From Diagnostic Mode, (Ref. GP 1) select: [Data Set Up>Set
Serial Number] then, using the keypad, enter the serial number. Press the <OK> button to
confirm selections. This function allows numeric entries only. For serial numbers containing
alpha characters (letters) use the serial number writing tool; USB_Serial.V1.02.exe.
June 2014
6-22 Xerox® WorkCentre® 3025 Multifunction Printer Service Manual