4.
Release the latch on the Paper Drive Roll Gear and remove it
Gear
Figure 2 Paper Drive Roll Gear (Left View)
Xerox® WorkCentre® 3025 Multifunction Printer Service Manual
(Figure
2).
5.
Remove the Feed Sensor Actuator
Note the location of the Spring in the frame cutout for reinstallation.
a.
June 2014
4-27
(Figure
3).
Unlatch and remove the actuator.
Latch
Figure 3 Feed Sensor Actuator (Rear View)
Spring
Feed Sensor Actuator
Repairs
REP 1.14