Clearing The Settings - Omron H5S Manual

4-9. Clearing the Settings

【Example 1】 Clearing a part of the settings.
① Set the Mode Switch to P1 or P2 and select
a setting to be cleared.
See Section 4-5 for 4 channel type.
② Give a short press on
("clr" appears on the main display and
"step" on the sub-display.)
※If
CLEAR
more, the display moves to the mode
for clearing all the settings of the circuit.
③ Press
WRITE
≪Note≫
CLEAR
• If is pressed while "clr" is flashing, clearing operation is cancelled.
• Each operation clears the following combination of settings.
Timer operation (weekly) Both the ON/OFF times
Pulse-output operation (weekly) Both the ON time and pulse width
Cyclic operation (weekly) Both the start/stop times and ON/OFF time periods
Timer operation (yearly) Both the start/end dates and ON/OFF times
Pulse-output operation (yearly) Both the start/end dates, ON time and pulse width
Holiday operation (weekly) All the holiday settings
Holiday operation (yearly) Both the start/end dates
Day override operation (weekly) All the day override operation settings
CLEAR
is held down for 3 s or
to clear the setting.
Weekly
2 chnls
The
SUN MON TUE WED THU
.
Yearly Yearly
2 chnls 4 chnls
color indicates flashing.
FRI SAT