Omron H5S Manual page 11

⑤ Press
WRITE
Set the ON time period with
⑥ Press
WRITE
Set the OFF time period with
⑦ Press WRITE
※1 If one or more programs have already been set, the display starts showing the set programs.
To add another program, press
※2 Holding down these Keys rapidly advances the value.
Pressing
≪Note≫
• If multiple settings are required, repeat the steps ② through ⑦.
All the start/stop times, ON/OFF time periods must be set.
•
• All the set weekly programs can be checked by pressing
setting mode.
• When the Mode Switch is set to P1 or P2 (to PRGM for 4 channel type), the
Time Switch stops automatic operation. To forcibly turn ON or OFF the output,
use the OUT ON/OFF switches.
• Set Cyclic operation so as not to overlap other operations in individual
• The set data will be cleared if the OUTPUT setting switch is moved between the
TIMER and PULSE positions after the data has been set.
.
h
.
h
to confirm the settings.
WRITE
decrements the value of the Key that was last pressed.
. ※2
and
m
SUN MON TUE WED THU
m . ※2
and
SUN MON TUE WED THU
repeatedly until "-- : --" is displayed.
FRI
FRI
in program
WRITE
circuits.
SAT
SAT