Enterasys Aurorean ANG-3000 Installation & Service Manual page 47

Chapter 3
Installing Software & Setting Networking Configurables
Aurorean Installation & Service Guide
3 Start the VNC application by pointing your Web browser at the APS.
In the Location field, type: http://192.168.1.3:5800
The VNC authentication window appears as shown in Figure 24. The
IP address you typed includes the port number (5800) with which to
access the APS.
Figure 24 Starting VNC Remote Control
4 Type welcome in the password field and click OK.
5 Press the
S
END
up the APS Login pop-up.
6 At the APS login, type administrator. For password, type welcome.
The APS desktop appears as shown in Figure 25.
button, (as shown in Figure 25) to bring
C -A -D
TRL LT EL
Installing APS-3000/7000 Software
33