Enterasys Aurorean ANG-3000 Installation & Service Manual page 4

ELECTRICAL HAZARD: Only qualified personnel should perform installation
procedures.
Important Safety Instructions
1) Read these instructions carefully. Save these instructions for future reference.
2) Follow all warnings and instructions marked on the product.
3) Unplug these products from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
4) Do not use these products near water.
5) Do not place these products on an unstable cart, stand, or table. The product may fall, causing serious
damage to the product. Enterasys Networks recommends securely fastening the server to a standard 19"
equipment rack.
6) Slots and openings in the chassis are provided for ventilation; to ensure reliable operation of the product
and to protect it from overheating, these openings should not be blocked or covered. The openings should
never be blocked by placing the product on a bed, sofa, rug, or other similar surface. These products should
never be placed near or over a radiator or heat register, or in a built-in installation unless the proper
ventilation is provided.
7) These products should be operated from the type of power indicated on the marking label. If you are not
sure of the type of power available, consult Enterasys Networks or your local power company.
8) Do not allow anything to rest on the power cord. Do not locate these products where persons will walk on
the cord.
9) If an extension cord is used with these products, make sure that the total ampere rating of the equipment
plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the
total rating of all products plugged into the wall outlet does not exceed the fuse rating.
10) Never push objects of any kind into these products through chassis slots as they may touch dangerous
voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on
the product.
11) Do not attempt to service these products yourself, as operating or removing covers may expose you to
dangerous voltage points or other risks. Refer all servicing to qualified service personnel.
12) Unplug these products from the wall outlet and refer servicing to qualified service personnel under the
following conditions:
a) When the power cord or plug is damaged or frayed.
b) If liquid has been spilled into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally when the operating instructions are followed. Adjust only
those controls that are covered by the operating instructions since improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to restore
the product to normal condition.
e) If the product has been dropped or the chassis has been damaged.
f) If the product exhibits a distinct change in performance, indicating a need for service.
13) Use only the proper type of power supply cord set (provided in your accessories box) for this unit. It should
be a detachable type, UL listed/CSA certified, type SPT-2, rated 7A 125V minimum, VDE approved or
equivalent. Maximum length is 15 feet (4.6 meters).
iv
Aurorean Installation & Service Guide