Enterasys Aurorean ANG-3000 Installation & Service Manual page 100

Backing Up the ANG Configuration
86
3 Do one or both of the following:
– To backup the configuration on a local directory, click Save
Configuration Locally and go to Step 4.
– To return to the General window, click Return.
4 When the File Download pop up appears, click OK.
5 After the Save As/Unknown File Type dialog box appears, select a
directory and click Save.
Do not attempt to change the file name. It cannot be renamed. The
Download complete window pops up as shown in Figure 62
displaying the file size and the directory where it was stored.
Figure 62 Download Complete Window
6 Do one of the following:
– Click Close to remove the window.
– Click Open to view the compressed file. When the WinZip pop
up appears, you can decompress the file to a temporary folder
and open it, displaying the three .IRX files. Then exit the WinZip
window.
– Click Open Folder to view the directory where the file is stored.
When the WinZip pop up appears, you can decompress the file to
a temporary folder and open it, displaying the three .IRX files.
Then exit the WinZip window.
Installing Software & Setting Networking Configurables
Aurorean Installation & Service Guide
Chapter 3