Enterasys Aurorean ANG-3000 Installation & Service Manual page 41

Chapter 2
Mounting & Connecting Systems
To determine the status of these links, check the LEDs on the front panel as
described in Chapter 3.
Aurorean Installation & Service Guide
EXTERNAL
(outside firewall)
Figure 20 Connecting Ethernet Cables to an ANG-3000/7000
3 Plug the orange, straight-through Ethernet cable supplied with the
ANG into the EXTERNAL port as shown in Figure 20.
4 Plug the opposite end of this cable into a wall jack, patch panel, or
hub linked to an unprotected network segment (outside a firewall).
TRUSTED
(behind firewall)
Connecting Cables
27