Enterasys Aurorean ANG-3000 Installation & Service Manual page 140

Upgrading Release 3.x to 3.5
You are now ready to connect the servers to the customer's network. Any
remaining configuration must be performed using RiverMaster.
126
Telnet window on the APS or your laptop and Telnet to the trusted
interface of the ANG.
2 Log in as netadmin, with the password netadmin.
3 Type su - and press
press
.
ENTER
4 Run the Admintool script by typing ./admintool to verify proper
configuration.
The following information will display:
Aurorean Network Gateway Administration Utility
1) Configuration and Administration
2) VPN Configuration and Installation Check
3) IPSec Configuration
4) Diagnostics
5) Interfaces and Routing
6) System log files
7) Quit
5 Choose Option 2 (VPN Configuration and Installation Check).
The following message will appear:
1. The IPSec Listener is running
2. A public default gateway of 192.168.2.1 exists
3. The Gated routing daemon is up and running
4. No errors were found in the TMS or IKE logs
5. The Authentication IP Address 192.168.1.53 responds via ping
6. Your VPN name is ENTERAVPN
There were no configuration problems found !
Press <RETURN> to continue...
6 Press You are returned to the menu. Type q to quit.
.
ENTER
7 Close the Telnet connection by typing bye.
Type the root password welcome and
.
ENTER
Aurorean Installation & Service Guide
Appendix D
Aurorean System Upgrades