Vlan Port Configuration - Enterasys Vertical Horizon VH-2402S Web Management Manual

VLAN Port Configuration

Use this screen to configure port-specific settings for IEEE 802.1Q VLAN
features.
Parameter
PVID
Ingress Filtering*
802.1Q Trunk Status
* This control does not affect VLAN independent BPDU frames, such as GVRP or
STP. However, it does affect VLAN dependent BPDU frames, such as GMRP.
9033821
Figure 3-31. VLAN Port Configuration
Description
The VLAN ID assigned to untagged frames received on this port.
Use the PVID to assign ports to the same untagged VLAN.
If enabled, incoming frames for VLANs which do not include this
port in their member set will be discarded at the inbound port.
Used to enable/disable the VLAN trunk status for the port. A
VLAN Trunk link between two VLAN-aware switches will carry
traffic from all VLANs, allowing VLAN tagged frames to maintain
their VLAN ID across multiple switches. When enabled, a port
joins all configured VLANs and the untagged port VLAN ID
(PVID) is set to 4000, a reserved VLAN ID for trunk ports.
.
.
.
Configuring and Monitoring the Switch 37