The MultiSwitch 700 Device View
Setting Port Operational Modes
To assign a port operational mode (dot1dTrunk, dot1QTrunk, or hybrid) to a port
on your 802.1Q switch:
1. In the VLAN Port Config window's list box, click to select a port to which you
2. In the Port Operational Mode field, click to select the desired operational
3. Click the Apply button. The selected mode will be reflected in the list box for
Setting Port Frame Discard Formats
To assign a frame discard format (discardTagged, discardUntagged, or
noDiscard) to a port on your 802.1Q switch:
1. In the VLAN Port Config window's list box, click to select a port to which you
2. In the Port Discard field, click to select the desired frame discard format.
3. Click the Apply button. The selected mode will be reflected in the list box for
Updating VLAN Port Config Window Information
Clicking the Refresh button will update the information displayed in the 802.1Q
VLAN Port Assignment list without closing the window.
Performing Egress List Configuration
802.1Q VLAN switching allows each port on a switch to transmit traffic for any or
all defined VLANs on your network. During egress list configuration, you
determine which VLANs are on each port's egress list. See
on
Egress list configuration operations are performed using the VLAN Egress Port
Config window. To launch the window:
1. Click on Device in the Device View menu bar to display the Device menu.
2. Click on 802.1Q VLAN and then right to select 802.1Q VLAN Egress Port
2-70
wish to assign a port operational mode.
mode.
the selected port.
wish to assign a frame discard format.
the selected port.
page 2-62
for details on egress lists.
Config. The VLAN Egress Port Config window,
Egress List
Operation,
Figure
2-28, opens.
Managing the Module