Spanning Tree Configuration - Enterasys Vertical Horizon VH-2402S Web Management Manual

Spanning Tree Configuration

The following figures and tables describe Bridge STA configuration.
Switch
Parameter
Usage
Priority
24 Configuring and Monitoring the Switch
Figure 3-17. STA Configuration - Switch
Default
Enabled
32,768
Description
Enable this parameter to participate in an STA-
compliant network.
Device priority is used in selecting the root device,
root port, and designated port. The device with
the highest priority becomes the STA root device.
(Remember that the lower the numeric value, the
higher the priority.) However, if all devices have
the same priority, the device with the lowest MAC
address will then become the root device.
Range: 0 - 65535
VH-2402S/VH-2402S2