Enterasys Vertical Horizon VH-2402S Web Management Manual page 13

Area
1
2
3
4
Table 2-2 describes configuration and system information functions
available In Area 3.
Function
System
Switch
IP
SNMP
Security
Upgrade
Configuration
Save&Restore
Address Table
STA
Bridge
Extension
Priority
VLAN
Management
VLAN
IGMP
Port
Mirror
Trunk
9033821
Table 2-1. Areas of the User Interface
Function
Displays the Enterasys Networks logo. Selecting this area takes you
directly to the Enterasys Networks Web site.
Presents a graphical near real-time image of the front panel of the
selected switch. This area displays the switch's ports and expansion
modules, showing port activity, duplex mode, or flow control,
depending on the specified mode.
Various areas of the graphic can be selected for performing
management functions, including the ports, expansion modules,
management module, or the case.
Displays a list of links allowing you to go to the associated menu or
screen by selecting the item.
Presents switch information based on your selection.
Table 2-2. Area 3 Functions
Description
Provides basic system description, including contact information.
Shows hardware/firmware version numbers, power status, and
expansion modules in use.
Includes boot state, IP address, and Telnet session count.
Configures communities and trap managers; and activates traps.
Sets password for system access.
Downloads new version of firmware to update your system.
Allows you to save/restore the switch configuration to a file on a server.
Provides full listing or unicast addresses, sorted by address or VLAN.
Enables Spanning Tree Algorithm; also sets parameters for switch
priority, hello time, maximum message age, and forward delay; as well
as port priority and path cost.
Displays/configures extended bridge capabilities provided by this
switch, including support for traffic classes, GMRP multicast filtering,
and VLAN extensions.
Configures default port priorities and queue assignments.
Allows you to restrict management access to the switch to one VLAN.
Configures VLAN group members, automatic registration with GVRP,
and other port-specific VLAN settings.
Configures IGMP multicast filtering.
Enables any port, sets communication mode to auto-negotiation, full
duplex or half duplex, and enables/disables flow control.
Sets the source and target ports for mirroring.
Specifies ports to group into aggregate trunks.
Using Web-Based Management 7