Commissioning, Inspection, Maintenance; Further Details Regarding The Individual Steps - Viessmann Vitocell 140-E Installation And Service Instructions For Contractors

Commissioning, inspection, maintenance

Further details regarding the individual steps

Venting the solar side
1. Open the clip fasteners and pull them
apart.
2. Slightly pull the thermal insulation to
the side. Vent at vent plug A on the
solar side.
42
3.
1.
2.
A
3. Close the thermal insulation back up
again.
Insert the rear sections of the
Vitotrans thermal insulation. Observe
the groove in the thermal insulation.
Note
If white creases appear on the surface of
the thermal insulation, these can be
removed with hot air (e.g. a hair dryer).