Viessmann Vitocell 140-E Installation And Service Instructions For Contractors page 38

Installation sequence
Vitocell with fitted Solar-Divicon
Fitting the cover strips
3.
2.
A Type plate
1. Tighten the nuts on the bolts.
2. Fit the front section of the Vitotrans
thermal insulation.
3. Trim and fit the cover strip.
38
1.
(cont.)
5.
4.
A
6.
4. Fit the rear strip to the cylinder.
5. Affix the type plate.
6. Tap the thermal insulation towards
the front. This reduces the gap to the
fitted modules.