Table of Contents
Related Manuals for Viessmann 6.0F-3
Summary of Contents for Viessmann 6.0F-3
- Page 1 Quick Installation Guide Hybrid Inverter (Viessmann Hybrid Inverter 6.0F-3 Viessmann Hybrid Inverter 8.0F-3 Viessmann Hybrid Inverter 10.0F-3 Viessmann Hybrid Inverter 12.0F-3 Viessmann Hybrid Inverter 15.0F-3) V1.1-2023-11-15...
-
Page 2: Safety Disclaimer
Safety Precautions General Disclaimer • The information in this quick installation guide is subject to change due to product updates or other reasons. This guide cannot replace the product labels or the safety precautions in the user manual unless otherwise specified. All descriptions here are for guidance only. •... -
Page 3: High Voltage Hazard
6. All labels and warning marks should be visible after the installation. Do not scrawl, damage, or cover any label on the device. 7. Do not touch the running equipment to avoid being hurt as its temperature may exceed 60°C. Do not install the equipment at a place within children's reach. -
Page 4: Battery Safety
The voltage and frequency at the connection point meet the inverter grid connection requirements. EU Declaration of Conformity Viessmann Climate Solutions SE hereby declares that the inverter with wireless communication modules sold in the European market meets the requirements of the following directives: • Radio Equipment Directive 2014/53/EU (RED) •... -
Page 5: Led Indicators
LED Indicators Indicator Status Description The inverter is power on and in the standby mode. The inverter is starting up and in the self-check mode. The inverter is in normal operation under grid-tied or off-grid modes. BACK-UP output overload. A fault has occurred. The inverter is powered off. - Page 6 11. Communication Module Port 12. AC Terminal 13. Heat Sink [1]: Viessmann Hybrid Inverter 6.0F-3, Viessmann Hybrid Inverter 8.0F-3: MPPT x 2; Viessmann Hybrid Inverter 10.0F-3, Viessmann Hybrid Inverter 12.0F-3, Viessmann Hybrid Inverter 15.0F-3: MPPT x 3. [2]: Viessmann Hybrid Inverter 12.0F-3 and Viessmann Hybrid Inverter 15.0F-3 are available with optional fans.
-
Page 7: Inverter Installation
Inverter Installation CT-L1 CT-L2 CT-L1 CT-L3 CT-L2 CT-L3 x 12 x 18 N = Quantity depends on the inverter model. - Page 8 Space Requirements Children No Touch ≥300mm ≥200mm ≥200mm ≥300mm ≥500mm ALT: 4000m IP66 0%~100%RH...
- Page 9 Angle Requirements Installing the Inverter D: 80mm φ: 8mm 3N·m Only for Australia.
- Page 10 1.2~2N·m Electrical Connection PE Cable L=L1+(1~2)mm Copper, S = 6mm 1.5~2N·m...
- Page 11 DC Cable (PV) Click 7~8mm Φ: 4~5mm 7~8mm ≤S≤6mm ≤ 1000V Click Click...
- Page 12 Battery Cable (BAT) Click 7~8mm Φ: 6.5~8.5mm 7~8mm 10mm ≤S≤16mm ≤ 720V Click Click...
- Page 13 AC Cable (ON-GRID&BACK-UP) Type One Φ: 18~22mm BACK-UP: 75mm ON-GRID: 55mm Copper, 6-8kW: S=4mm 10-15kW: S=6mm...
- Page 14 Type Two Φ: 18~22mm BACK-UP: 75mm ON-GRID: 55mm Copper, 6-8kW: S=4mm 10-15kW: S=6mm...
- Page 15 Communication Connection Communication Cable (PIN terminal) 6~8mm Φ: 5.5mm 25mm 0.2mm ≤ S ≤ 0.3mm...
- Page 16 (Optional) 7: RSD+ DRED/RCR (Optional) BMS EN Meter 8: RSD- 13: DRM0 or REF_1 (Optional) 1: CT1 + (Optional) (Optional) 14: RefGen or REF_2 2: CT1 - 21: EN- 11: DO+ LOAD CNTL 19: RS485B 15: DRM4/8 or DI_4 3: CT2 + 22: EN+ 12: DO- 16: DRM3/7 or DI_3...
- Page 17 CT Cable CT-L2 CT-L1 CT connecting cable: 15m CT-L3 CT-L2 CT-L3 CT-L1 CT-L1 CT-L2 CT-L2 (Optional) CT CT-L1 CT-L1 CT-L1 extension cable: 10m CT-L3 CT-L2 CT-L2 CT-L3 CT-L2 CT-L3 CT-L3 CT-L3...
- Page 18 Communication Cable (RJ45 network cable) Parallel1&EMS Parallel2 Port 1 2 3 4 5 6 7 8 Color Port (PAR- (PAR-2) (CAN) 1&EMS485) Orange&White RS485A (EMS) Orange RS485B (EMS) Green&White Blue CANH (Reserved) CANH (Reserved) CANH Blue&White CANL (Reserved) CANL (Reserved) CANL Green GND (Reserved)
- Page 19 PAR-1 & PAR-2 EMS485 Parallel1&EMS Port (PAR-1&EMS485) Parallel2 Port (PAR-2 Reserved) BMS (CAN) Communication Module WiFi/LAN Kit-20, 4G Kit module: optional.
- Page 20 Power On and Off For Australia only. Inverter ON-GRID PV string AC breaker Utility Meter Utility grid PV string BACK-UP Battery breaker Battery BACK-UP loads Power On Turn on Power Off Turn off...
- Page 21 Commissioning and Monitoring Commissioning via StorageMate APP play StorageMate App Store <5m StorageMate Monitoring via Solar Portal App play Solar Portal App Store <10m Solar Portal App...
- Page 22 Viessmann Climate Solutions SE Viessmannstraße 1 D-35108 Allendorf (Eder) 340-01009-01...