Viessmann Vitocell 140-E Installation And Service Instructions For Contractors page 10

Installation information
Product information
Siting information
!
Please note
To prevent material losses, install
the heating water buffer cylinder
in a room free from the risk of frost
and draughts.
Otherwise the heating water buf-
fer cylinder must be drained
when not in use and there is a risk
of frost.
Installing the Vitocell with an immersion heater
Cylinder capacity
750 and 950 l
Note
The unheated length of any threaded
immersion heater installed on site must
be at least 100 mm.
10
(cont.)
■ Provide adequate clearance from the
■ Placing the heating water buffer cylin-
Maintain the minimum clearance.
a
Output
Immersion heater
wall so that the temperature controller
can be operated (if installed).
der on a plinth will make the room eas-
ier to clean.
Immersion heater installation
instructions
Dim. a
6 kW
12 kW
min. 500 mm
min. 700 mm