Viessmann Vitocell 140-E Installation And Service Instructions For Contractors page 37

Vitocell with fitted Solar-Divicon
1. At the back of the cylinder: Attach 6
clip fasteners to the edges of the right
and left sections of the insulation
jacket. Place the thermal insulation
jacket around the cylinder body.
Note
Leave the clip fasteners in the first
notch.
2. Fit the clip fasteners behind the
Solar-Divicon and between Solar-
Divicon and Vitotrans, maintaining an
even spacing.
Installation sequence
(cont.)
3. Push the clip fasteners as close
together as possible.
4. Install the immersion heater EHE or
seal the hole with a cover.
37