Table of Contents
Advertisement
Item
PREREC MODE
Sets the pre-recording mode. (page 41)
[ON], [OFF]
ONE CLIP REC
Sets one-clip recording mode. (page 43)
[ON], [OFF]
START TEXT MEMO
Sets the function that automatically adds a text memo at recording start position
each time recording is started.
[ON], [SHOOT INFO], [OFF]
TC MODE
Sets count compensation for the built-in time code generator of the camera.
(page 66)
[DF]
[NDF]
UB MODE
Sets the content to be recorded in user bits. (page 64)
[USER], [TIME], [DATE], [EXT], [TCG], [FRM.RATE]
[AUDIO SETUP] screen
Item
FRONT VR CH1
Sets whether to enable or disable front volume for CH1 input.
[FRONT]
[W.L.]
[REAR]
[ALL]
[OFF]
FRONT VR CH2
Sets whether to enable or disable front volume for CH2 input.
The setting contents are the same as [FRONT VR CH1].
[OFF]
FRONT VR CH3
Sets whether to enable or disable front volume for CH3 input.
The setting contents are the same as [FRONT VR CH1].
[OFF]
FRONT VR CH4
Sets whether to enable or disable front volume for CH4 input.
The setting contents are the same as [FRONT VR CH1].
[OFF]
MIC LOWCUT CH1*
Sets microphone low cut filter for CH1.
[FRONT]
[W.L.]
[REAR]
[OFF]
MIC LOWCUT CH2*
Sets microphone low cut filter for CH2.
The setting contents are the same as [MIC LOWCUT CH1].
[OFF]
MIC LOWCUT CH3*
Sets microphone low cut filter for CH3.
The setting contents are the same as [MIC LOWCUT CH1].
[OFF]
Chapter 7 Menu Operations — Menu list
Description of settings
Counts in drop frame mode.
Counts in non-drop frame mode.
Description of settings
Front volume is enabled when CH1 is front microphone input.
Front volume is enabled when CH1 is wireless input.
Front volume is enabled when CH1 is rear input.
Front volume is enabled when CH1 is either front, wireless, or
rear.
Front volume is disabled for CH1.
Works for front microphone input.
Works for wireless input.
Works for rear microphone input.
Off for any input.
– 125 –
Remark
f This setting is not available in the following cases:
- The [REC SIGNAL] item is [SDI IN].
- The [VFR] item is set to [ON].
Excluding the case when the frame rate and
the number of frames of recording playback are
matched (30P:30PN, 25P:25PN, 24P:24PN)
- The [REC FUNCTION] item is set to other than
[NORMAL].
f This setting is not available in the following cases:
- The [REC FUNCTION] item is other than
[NORMAL].
- The [REC SIGNAL] item is [SDI IN].
- The [VFR] item is [ON].
Excluding the case when the frame rate and
the number of frames of recording playback are
matched (30P:30PN, 25P:25PN, 24P:24PN)
f This setting is not available when the [REC
FUNCTION] item is other than [NORMAL].
f Text memos added when the [START TEXT
MEMO] item is [ON] or [SHOOT INFO] indicate
the recording start position.
In addition, when [SHOOT INFO] is selected, the
camera setting information ([F.RATE]/[SHTR]/
[IRIS]/[GAIN]/[ND]/[ZOOM]/[EXT.]/[FOCUS]/
[GAMMA]/[CC]) is added to this text memo.
To record text memos as character information,
refer to "Setting clip metadata" (page 108).
f This setting is not available when activating in
[24P], [24PA], or [24PN]. Counting is always
performed in the non-drop frame mode.
indicates factory setting values.
Remark
f When audio channel 1 is set to [AUTO] at the
[LVL] item on the [AUD02:INPUT] screen of
SmartUI, front volume is disabled regardless of
the setting of this item since automatic adjustment
mode is used.
f When audio channel 2 is set to [AUTO] at the
[LVL] item on the [AUD02:INPUT] screen of
SmartUI, front volume is disabled regardless of
the setting of this item since automatic adjustment
mode is used.
f When audio channel 3 is set to [AUTO] at the
[LVL] item on the [AUD02:INPUT] screen of
SmartUI, front volume is disabled regardless of
the setting of this item since automatic adjustment
mode is used.
f When audio channel 4 is set to [AUTO] at the
[LVL] item on the [AUD02:INPUT] screen of
SmartUI, front volume is disabled regardless of
the setting of this item since automatic adjustment
mode is used.
indicates factory setting values.
Advertisement
Table of Contents
