Table of Contents
Advertisement
Setup menu list (continued)
AUDIO SETUP screen
Item
LIMITER CH1
LIMITER CH2
LIMITER CH3
LIMITER CH4
AUTO LEVEL
CH3
AUTO LEVEL
CH4
25M REC CH SEL Selects the audio channels to be recorded in the DVCPRO
TEST TONE
INT MIC
___indicates the factory setting.
140
Sets the CH1 limiter.
ON, OFF
Sets the CH2 limiter.
ON, OFF
Sets the CH3 limiter.
ON, OFF
Sets the CH4 limiter.
ON, OFF
Selects the method for setting CH3 level.
ON:
Engages the auto adjustment mode. (The limiter is not
available.)
OFF:
Locks the level.
Selects the method for setting CH4 level.
Same setting as AUTO LEVEL CH3.
ON, OFF
and DV formats.
2CH:
Only recorded on CH1 and CH2.
4CH:
Records on all four channels.
Selects the test signal.
LEVEL1:
A 1 kHz test tone is output during color bar output.
LEVEL2:
Outputs the above test tone at a volume lower than
LEVEL1.
OFF:
Does not output a test tone.
Determines whether or not input from the internal
microphone is used during recording.
ON:
Uses internal microphone input.
OFF:
Does not use internal microphone input.
Setting
Notes
• When the AUDIO AUTO/MANU
CH1 switch is set to AUTO
and auto adjustment mode is
active, the limiter is disabled
regardless of these settings.
• When the AUDIO AUTO/MANU
CH2 switch is set to AUTO
and auto adjustment mode is
active, the limiter is disabled
regardless of these settings.
• When the AUDIO AUTO/MANU
CH3 switch is set to AUTO
and auto adjustment mode is
active, the limiter is disabled
regardless of these settings.
• When the AUDIO AUTO/MANU
CH4 switch is set to AUTO
and auto adjustment mode is
active, the limiter is disabled
regardless of these settings.
• Not available in the following
conditions.
· W hen SYSTEM MODE is
1080-59.94i (50i) or 720-
59.94P (50P).
· W hen SYSTEM MODE is set
to 480-59.94i or 576-50i and
REC FORMAT is set to the
DVCPRO50 codec.
· W hen compiling to a clip in
one-clip recording mode.
Advertisement
Table of Contents
