Table of Contents
Advertisement
[IN/OUT SEL] screen
Item
SDI OUT
Sets the video output from the <SDI OUT/IN (OP)> terminal.
[ON]
[OFF]
SDI OUT CHAR
Selects whether to superimpose characters to [SDI OUT].
[ON]
[OFF]
SDI METADATA
Sets superimposition of [SDI OUT] metadata (UMID).
[ON]
[OFF]
SDI EDH
Sets superimposition of EDH when [SDI OUT] is the SD signal (480i and 576i).
[ON]
[OFF]
HD SDI REMOTE
Sets whether to use the recording control function for external devices (such as
recorders) connected to the <SDI OUT/IN (OP)> terminal or the <MON OUT>
terminal. (For HD SDI signal output)
[ON]
[OFF]
AUTO REC (OP2)
Selects the function that automatically starts or stops recording by detecting
REC START/STOP mark from the frame rate information of user bits added to the
HD SDI input signal in HD mode.
[TYPE1]
[TYPE2]
[OFF]
MON/HDMI ZEBRA
Selects whether the zebra pattern is superimposed over the output signals from
the <MON OUT>, <HDMI>, and <REMOTE> terminals. (The remote VBS signal
also interlocks.)
[ON]
[OFF]
TC IN/OUT SEL
Selects whether to use the <TC IN/OUT> terminal in TC IN or TC OUT.
[TC OUT]
[TC IN]
TC OUT
Sets the time code type output from the <TC IN/OUT> terminal.
[TCG]
[TCG/TCR]
TC VIDEO SYNC
Sets the output delay of time code output from the <TC IN/OUT> terminal.
[RECORDING]
[VIDEO OUT]
[DISPLAY SETUP] screen
Item
EVF PEAK LEVEL
Adjusts the peaking level of the viewfinder screen.
[−7] ... [0] ... [+7]
EVF PEAK FREQ
Adjusts the peaking frequency of the viewfinder screen.
[LOW]
[HIGH]
EVF TYPE
Selects the type of viewfinder to be connected.
[COLOR]
[B/W]
Chapter 7 Menu Operations — Menu list
Description of settings
Outputs video from the output.
Does not output video from the output.
Superimposes characters.
Does not superimpose characters.
Superimposes metadata.
Does not superimpose metadata.
Superimposes EDH.
Does not superimpose EDH.
Controls recording operations of external devices.
Does not control recording operations of external devices.
Performs automatic recording by detecting from LTC of the HD
SDI input signal.
Performs automatic recording by detecting from VITC of the HD
SDI input signal.
Does not perform automatic recording.
Superimposes zebra patterns.
Does not superimpose zebra patterns.
Uses TC OUT.
Uses TC IN.
Always outputs the time code generator value of the camera.
Outputs the time code generator value when outputting
camera images, and outputs the played time code value when
outputting playback images.
Outputs TCG to be recorded without delay.
Outputs images according to the delay of output images from
the <MON OUT> and <SDI OUT/IN (OP)> terminals.
Description of settings
Sets the peaking frequency lower.
Sets the peaking frequency higher.
Connects the color viewfinder. (AJ-CVF100G, AG-CVF10G)
Connects the black and white viewfinder. (AJ-HVF21KG)
– 127 –
Remark
f When the [SYSTEM MODE] item is
[1080-23.98PsF], characters are not
superimposed to the video of [SDI OUT], and this
item is not displayed.
f The recording control is output to external devices
when set the item to [ON]. While recording is being
executed, lamps such as the REC lamp, front tally
lamp, and back tally lamp on the viewfinder, and
the tally lamp on the camera are illuminated.
f The recording control is not output while interval
recording and loop recording.
f For supported external devices (such as
recorders), visit the following website:
http://panasonic.biz/sav/autorec_e/
The recording control status is displayed on the
viewfinder screen of the camera. (page 72)
f Set the user bits added to the HD SDI signal at the
output device of the HD SDI signal as the frame
rate. For setting procedure, refer to the operating
instruction of the output device.
f Set the [REC SIGNAL] item to [SDI IN], and input the
HD SDI signal to the <SDI OUT/IN (OP)> terminal.
f For frame rate information of the user bits, refer to
"User bits settings" (page 64).
f This setting interlocks with the setting of [ZBR]
on the [SET03:MON/HDMI SETUP] screen of
SmartUI.
indicates factory setting values.
Remark
indicates factory setting values.
Advertisement
Table of Contents
