Table of Contents
Advertisement
Setting menu basic operations
SmartUI basic operations
When the camera is turned on, the [HOME] screen is displayed. The status of the [HOME] screen at previous start-up is retained.
1 <LIGHT> button
Toggles the backlight of SmartUI on and off. Can be operated regardless of the status of the <KEY LOCK> switch.
2 <CAM> button
Displays a settings screen related to the camera image.
Each time you press the button, the settings screens change in order.
3 <AUDIO> button
Displays a settings screen related to audio.
Each time you press the button, the settings screens change in order.
4 <SETUP> button
Displays a settings screen related to time code and image output.
Each time you press the button, the settings screens change in order.
5 <HOME> button
f While another screen is displayed, press this button to return to the [HOME] screen.
f While the [HOME] screen is displayed, press this button to change the status information display at the bottom of the screen.
f While the <SHIFT> button is pressed, press the <HOME> button to display the information of clips selected on the thumbnail screen.
6 <KEY LOCK> switch
Slide to the right to lock the operations of all buttons of SmartUI. Slide to the left to unlock.
* Buttons for thumbnail operations will be locked as well.
7 <HOLD> button, <COUNTER> button, <RESET> button, <MONITOR SEL> button, <%/REW> button, <STOP> button, <FF/)> button,
and <PLAY/PAUSE> button
f When the [HOME] screen is displayed
The function printed above or below each button is performed.
f When the setting screen is displayed by pressing the <CAM> button, <AUDIO> button, or <SETUP> button on the [HOME] screen
Instead of the printed functions, the functions in the [ ] of SmartUI are assigned to upper or lower buttons corresponding to each setting screen. For
details, refer to "Menu list" (page 138).
Initializing SmartUI setting menu items
Items configured with SmartUI are saved in the user file.
By selecting [INITIAL] in the [USER FILE] item of the [OTHER FUNCTIONS] screen, you can restore the user file menu setting to its factory setting.
Use the [MENU INIT] item in the [OTHER FUNCTIONS] screen to restore all of the user files and six scene files to their factory settings.
Chapter 8 Using SmartUI — Setting menu basic operations
HOLD
COUNTER
TC
NDF SLAVE P -REC
7
CH1
MEDIA
A
E
F
CH2
BATT
E
F
/REW
STOP
KEY LOCK
6
– 135 –
RESET MONITOR SEL
LIGHT
CAM
0
AUDIO
-10
-18
-20
SETUP
-30
dB
1
2
HOME
FF/
PLAY/PAUSE
THUMBNAIL
SET
TOP
SHIFT
1
2
3
4
5
Advertisement
Table of Contents
