Panasonic P2HD AG-HPX610P Operating Instructions Manual page 141

Screen Corresponding button
AUD02:INPUT Selects the audio input signal and sets the recording adjustment method.
r When audio channel 1/2 is selected
<%/REW> button
<STOP> button
<FF/)> button
<PLAY/PAUSE> button
<MONITOR SEL> button
r When audio channel 3/4 is selected
<%/REW> button
<STOP> button
<FF/)> button
<PLAY/PAUSE> button
<MONITOR SEL> button
AUD03:MONI Selects the audio to be output to the speaker, the <PHONES> terminal, and the <AUDIO OUT> terminal.
r When audio channel 1/2 is selected
<%/REW> button
<STOP> button
<MONITOR SEL> button
r When audio channel 3/4 is selected
<%/REW> button
<STOP> button
<MONITOR SEL> button
Chapter 8 Using SmartUI — Menu list
[IN]
Selects the input signal to be recorded to audio
channel 1.
[LVL]
Selects the method to adjust the recording level for
audio channel 1.
[IN]
Selects the input signal to be recorded to audio
channel 2.
[LVL]
Selects the method to adjust the recording level for
audio channel 2.
[CH3/4]
Toggles the audio input setting screen between CH3/CH4. Setting contents that switch in coordination are
the same as the [AUD01:LEVEL] screen.
[IN]
Selects the input signal to be recorded to audio
channel 3.
[LVL]
Selects the method to adjust the recording level for
audio channel 3.
[IN]
Selects the input signal to be recorded to audio
channel 4.
[LVL]
Selects the method to adjust the recording level for
audio channel 4.
[CH1/2]
Toggles the audio input setting screen between CH1/CH2. Setting contents that switch in coordination are
the same as the [AUD01:LEVEL] screen.
[SEL1]
Selects the audio to be output to the speaker, the
<PHONES> terminal, and the <AUDIO OUT>
terminal.
[SEL2]
Selects the audio to be output from the speaker,
the <PHONES> terminal, and the <AUDIO OUT>
terminal when [ST] is selected at [SEL1].
[CH3/4]
Toggles the audio monitor setting screen between CH3/CH4. Setting contents that switch in coordination
are the same as the [AUD01:LEVEL] screen.
[SEL1]
Selects the audio to be output to the speaker, the
<PHONES> terminal, and the <AUDIO OUT>
terminal.
[SEL2]
Selects the audio to be output from the speaker,
the <PHONES> terminal, and the <AUDIO OUT>
terminal when [ST] is selected at [SEL1].
[CH1/2]
Toggles the audio monitor setting screen between CH1/CH2. Setting contents that switch in coordination
are the same as the [AUD01:LEVEL] screen.
– 141 –
Setting details and setting value
[FRONT]
Records the microphone input signal connected to
the <MIC IN> terminal.
[W.L.]
Records the input signal from the wireless receiver.
[REAR]
Records the audio input signal from the audio
device or microphone connected to the <AUDIO
IN> terminal.
[AUTO]
Enables automatic adjustment.
[MANU]
Enables manual adjustment. The setting contents
are the same as [AUD01:LEVEL].
The setting contents are the same as audio channel
1.
The setting contents are the same as audio channel
1.
The setting contents are the same as audio channel
1.
The setting contents are the same as audio channel
1.
The setting contents are the same as audio channel
1.
The setting contents are the same as audio channel
1.
[CH1]
Monaural output from audio channel 1.
[ST]
Stereo output from audio channel 1 and 2.
[CH2]
Monaural output from audio channel 2.
[ST]
Stereo output from audio channel 1 and 2.
[MIX]
Mixed output from audio channel 1 and 2.
[CH3]
Monaural output from audio channel 3.
[ST]
Stereo output from audio channel 3 and 4.
[CH4]
Monaural output from audio channel 4.
[ST]
Stereo output from audio channel 3 and 4.
[MIX]
Mixed output from audio channel 3 and 4.
indicates factory setting values.